Lowering aim sensetivity

General Mar0 discussion has been moved to this subforum!
Post Reply
Danfun64
Posts: 9
Joined: 09 Mar 2013, 22:37

Post » 03 Apr 2013, 00:01

On my Logitech F310, when I aim with the right stick, it aims too fast. Is there a way to lower the sensitivity? Can you make it so that you aim with the trigger keys (not accepted unless it's buttons unfortunately, and even then it wouldn't work.) I just want gamepad aiming to be different.

User avatar
Superjustinbros
Posts: 2119
Joined: 29 Mar 2012, 20:39
Contact:

Post » 03 Apr 2013, 02:26

I find it a little too sensitive with gamepad aiming as well when I play with a gamepad.

User avatar
Carnivore Batman
Posts: 7
Joined: 05 Apr 2013, 04:41

Post » 05 Apr 2013, 05:02

Hey people who know Lua.
Make the mod.

User avatar
TripleXero
Posts: 892
Joined: 08 Aug 2012, 00:23
Contact:

Post » 05 Apr 2013, 05:08

Hey Batman
Don't be so demanding

User avatar
Carnivore Batman
Posts: 7
Joined: 05 Apr 2013, 04:41

Post » 05 Apr 2013, 06:17

Hey Xero.
You're telling me what to do, therefore you're being demanding too.

HAPPYFACES
Posts: 524
Joined: 02 Jun 2012, 03:40

Post » 05 Apr 2013, 06:25

Carnivore Batman wrote:Hey Xero.
You're telling me what to do, therefore you're being demanding too.
Hey Carnivore Batman.
You're being a condescending ass.

I think you may be trying to catch on to the asshole-attitude that commonly appears around here. Try again. Next time, try being an ass with good intent in mind.
Last edited by HAPPYFACES on 05 Apr 2013, 06:28, edited 1 time in total.

User avatar
TripleXero
Posts: 892
Joined: 08 Aug 2012, 00:23
Contact:

Post » 05 Apr 2013, 06:27

Hey Batman
You could possibly consider being less demanding

User avatar
Carnivore Batman
Posts: 7
Joined: 05 Apr 2013, 04:41

Post » 05 Apr 2013, 06:28

Hey Xero.
Kay then.
Hey HAPPYFACES.
was that an insalt
because i dont have any salt

HAPPYFACES
Posts: 524
Joined: 02 Jun 2012, 03:40

Post » 05 Apr 2013, 06:30

I lol'd.
You're good. Welcome to Stabyourself.

User avatar
Carnivore Batman
Posts: 7
Joined: 05 Apr 2013, 04:41

Post » 05 Apr 2013, 06:33

Thanks for the welcome. *Going to add Batman sprites to all games*

User avatar
Legend_of_Kirby
Posts: 752
Joined: 14 Oct 2012, 05:37
Contact:

Post » 05 Apr 2013, 06:40

I'd say welcome, but I fear you will become a spammer. But if you somehow stay active, don't spam, have a nice attitude, and don't complain. Welcome to the forums!
Have a nice stay.

User avatar
Carnivore Batman
Posts: 7
Joined: 05 Apr 2013, 04:41

Post » 05 Apr 2013, 06:44

I will have a nice stay.
During a nice day.
The right way.
Today.

Maurice
Stabyourself.net
Posts: 2145
Joined: 01 Feb 2012, 20:19

Post » 05 Apr 2013, 08:55

I'll see about increasing the deadzone.
The problem is that some joysticks might be configured badly and not go all the way to 1.0.

Franpa
Posts: 409
Joined: 08 Mar 2012, 07:20
Contact:

Post » 05 Apr 2013, 12:55

I think they want the sensitivity to be weighted so that sensitivity sharply increases when you push the analog stick to almost the maximum angle. When pushing the analog stick a small or moderate amount it would move the courser slower then it currently does.

Increasing the dead zone does nothing for sensitivity, that just makes it less responsive and compress the valid range of values increasing the sensitivity.

Maurice
Stabyourself.net
Posts: 2145
Joined: 01 Feb 2012, 20:19

Post » 05 Apr 2013, 16:53

There is no cursor.
He is likely talking about portal aiming with a stick.

Or do you (OP) mean a smoothing of the angle?

Camewel
Posts: 2996
Joined: 02 Feb 2012, 21:32

Post » 05 Apr 2013, 18:20

I think there's some kind of misunderstanding as to how aiming with a joystick works.
The gun points where you push the stick, there's no sensitivity involved.
Aiming with a stick is already hard enough at speed without having to wait for your aim to go where you want.

User avatar
Superjustinbros
Posts: 2119
Joined: 29 Mar 2012, 20:39
Contact:

Post » 05 Apr 2013, 22:55

I think the solution here is primarily make the speed the cursor revolves around the player slower, in that let's say I have the joystick pointing to the right, then I press it up, and the cursor rotates itself upwards, slowly and then stoping right on the desired angle.

Camewel
Posts: 2996
Joined: 02 Feb 2012, 21:32

Post » 06 Apr 2013, 01:13

I think the solution here is to read the post above you so you know that's exactly what Maurice suggested and exactly what I just said would be a bad idea.

Maurice
Stabyourself.net
Posts: 2145
Joined: 01 Feb 2012, 20:19

Post » 06 Apr 2013, 11:00

I think a little smoothing won't be worse.

Franpa
Posts: 409
Joined: 08 Mar 2012, 07:20
Contact:

Post » 06 Apr 2013, 18:53

Camewel wrote:I think there's some kind of misunderstanding as to how aiming with a joystick works.
The gun points where you push the stick, there's no sensitivity involved.
Aiming with a stick is already hard enough at speed without having to wait for your aim to go where you want.
Ah okay, my bad then. Not sure if this is exactly what smoothing is but maybe make it ignore really minor movements of the analog stick? So that your aim doesn't twitch etc.

Camewel
Posts: 2996
Joined: 02 Feb 2012, 21:32

Post » 06 Apr 2013, 20:05

Smoothing would fix the twitching.

Maurice
Stabyourself.net
Posts: 2145
Joined: 01 Feb 2012, 20:19

Post » 08 Apr 2013, 08:22

A bigger deadzone would fix it properly.

Camewel
Posts: 2996
Joined: 02 Feb 2012, 21:32

Post » 08 Apr 2013, 17:16

I think he means more twitching as in he has twitchy thumbs.
Smoothing as an option that's enabled by default probably be the best plan here.
A bigger deadzone wouldn't be a bad idea though, it's not as if you use anything other than the extremes of the stick to aim anyway.

Maurice
Stabyourself.net
Posts: 2145
Joined: 01 Feb 2012, 20:19

Post » 08 Apr 2013, 18:03

Unless he's michael j fox I really doubt that.

Post Reply